Shandong Changtai Industry & Trade Co., Ltd.

PRODUCTS

Shandong Changtai Industry & Trade Co., Ltd., was established in 2008. Our factory is located in Dongying which is the biggest tyre manufacturing center in China.

Inner tube of construction machinery
0.00
Truck inner tube
0.00
Inner tube of industrial forklift truck
0.00
Inner tube of agricultural equipment
0.00





TECHNOLOGY STRENGTH

Shandong Changtai Industry & Trade Co., Ltd., was established in 2008. Our factory is located in Dongying which is the biggest tyre manufacturing center in China. It takes three hours to drive from Dongying to Qingdao.

ISO/TS16949: 2009 automotive supplier quality system certification common sense

ISO/TS16949 automotive supplier quality system requirements were jointly formulated by members of the International Automotive Task Force (IATF) and submitted to the International Organization for Standardization (ISO) for approval and publication of the global automotive industry technical specifications, March 1999 The ISO/TS16949: 1999 version of the technical specification was published. Subsequently, the IATF coordinated the three European standards VDA6.1 (Germany), VSQ (Italy), EAQF (France) and QS-9000 (North America), and in accordance with ISO9001: Based on the combination of the 2000 version of the standard, and under the approval of ISO/TC176, the ISO/TS16949:2002 version of the technical specification was formulated and published in March 2002. On June 15, 2009, the ISO/TS16949: 2009 version was officially promulgated. The ISO/TS16949: 2009 version is based on ISO9001: 2008. The process-oriented quality management model is used as a supplier quality system. This technology The specification applies to the entire supply chain of parts and service parts produced by the automotive industry, including automakers. On April 24, 2002, the three major automakers, Ford, General Motors and Chrysler, held a press conference in Detroit, Michigan, USA, announcing a unified quality system specification for suppliers. This specification is ISO/TS16949. If a supplier fails to obtain ISO/TS16949 certification, it will also mean that it loses its qualification as a supplier. Currently, French Citroen (Citroen), Peugeot (Peugeot), Renault (Renault) and Japan's Nissan (Nissan) automakers have mandated that their suppliers pass ISO/TS16949 certification. The ISO/TS 16949 standard system completely stipulates the basic requirements of the international automotive industry quality management system, adding various customer support reference manuals and special requirements, reflecting the essence of quality management in the contemporary automotive industry, and improving the quality of the world automotive industry. The development of the management system will have an important impact. ISO/TS 16949 standard certification activities have been carried out on a global scale and have attracted the attention of my country's automobile industry. 1. ISO/TS16949 certification scope 1) Used in the design, development and production of automobile-related products; when relevant, it is also suitable for installation and service. 2) Applicable to the manufacturing site of the production parts and/or repair parts specified by the customer. Including the following production or processing sites: -production materials; -production or repair parts; -assembly; ——Heat treatment, welding, painting, electroplating or other surface treatment. 3) Support functions, whether they are on-site or external (such as design centers, company headquarters, and distribution centers), form part of the on-site audit due to their supporting role on the site, but they cannot be independently certified by this standard. 4) TS16949 can be applied to the entire automotive supply chain. 2. ISO/TS16949 certification requirements for the auditee ISO/TS16949:2009 certification registration is only applicable to automobile manufacturers and their direct spare parts manufacturers. These manufacturers must be directly related to the production of automobiles, have processing and manufacturing capabilities, and enable their products to add value through the realization of this capability. Companies that require ISO/TS16949:2009 certification registration must have at least 12 months of production and quality management records, including complete records of internal and management reviews. For a newly established processing site, if there is no 12-month record, it can also be reviewed. Upon review, the certification company may issue a letter that meets the requirements of the quality system. After 12 months of records have been obtained, the certification audit registration will be carried out. For a company that has obtained a certificate, if it cannot continue to maintain the normal operation of the quality system and the consistency of product quality, there is a risk of the certificate being revoked. 3. ISO/TS16949 certification goals ◇Continuous improvement in the supply chain Quality improvement² Productivity improvement² Cost reduction² ◇ Emphasize the prevention of shortcomings SPC application² Error prevention method² ◇Reduce variation and waste Reduce quality variation² Ensure inventory turnover and minimum inventory Control the cost of poor quality² Control non-quality extra cost (waiting on line, excessive handling...etc)² 4. The benefits of ISO/TS16949 for enterprises ◆　 Establish general automotive industry quality management system standards to meet the requirements of different customers; ◆　 establish a robust and value-added quality system to evaluate capabilities and performance; ◆　 reduce costs and improve ef

View Article →

ISO/TS16949: 2009 automotive supplier quality system certification common sense

View Article →

08/21/2020

Annual production of 300,000 rubber tire vulcanization bladder project

Shandong Changtai Industry and Trade Co., Ltd. Annual Production of 300,000 Rubber Tire Vulcanization Bladder Project 1. Project introduction Shandong Changtai Industry and Trade Co., Ltd. annual production of 300,000 rubber tire vulcanization bladder project is an expansion project of Shandong Changtai Industry and Trade Co., Ltd. The product tire curing bladder of this project is an important tool for vulcanizing tires in the manufacture of radial tires. It is a large rubber product in special rubber products and a consumable product in the tire manufacturing industry. At present, there are two types of shaping and curing methods in the production of radial tires: one is to use traditional water tire shaping and curing. The quality of tires cured in this way is poor, and the consumption of water tires is large, resulting in a higher cost of single tire curing. Another way is to use bladder vulcanization. Whether it is tank vulcanization using a dual-mode vulcanizer or a simple external setting device, or a single or dual-mode simple vulcanizer, bladder vulcanization avoids the shortcomings of water tire setting vulcanization Higher cost cost consumption. It is a product promoted by the country and conforms to the current industrial policy. This project is newly built in the Xishui Industrial Cluster Area of Guangrao County. Located in the existing company courtyard, no more land is occupied. The plant area is planned industrial land, and its construction meets the requirements of the overall development plan of Guangrao County and Daozhuang Town. The pollution produced by the new project during the production process is exhaust gas, wastewater, solid waste, noise, and the exhaust gas pollutants emitted are mainly carbon black dust, non-methane total hydrocarbons, odor and SO2, NOx, smoke and dust in boiler flue gas. , Waste water is mainly COD, ammonia nitrogen, etc., solid waste is mainly some domestic garbage and leftovers generated during the production process. The pollutants generated during the production process will cause a certain amount of environmental air, water and acoustic environment around the environment. influences. The proposed treatment measures for the above pollutants in this project are: (1) The carbon black dust flue gas generated in the rubber refining process is treated by a bag filter with a dust removal efficiency of 95%; the waste gas generated in the hot rubber flue gas, molding and vulcanization process is collected by the gas collection system and then enters the activated carbon adsorption treatment The device performs treatment with a treatment efficiency of more than 90%; the boiler flue gas is treated by a water film desulfurization dust collector and discharged through a 35-meter chimney. The desulfurization efficiency is 65% and the dust removal efficiency is more than 85%. After treatment, all kinds of flue gas can meet the emission standards. (2) The production process of this project produces very little waste water, and the produced sewage is mainly domestic sewage. It is planned to build a small biochemical tank in the plant for treatment, and after treatment, it will be used for plant greening, and the discharged sewage will be rainwater. (3) The solid waste generated in the production process is basically recycled, and the household garbage is collected by the sanitation department, and the boiler slag is sold. (4) The noise adopts a closed workshop. After evaluation, it is believed that the construction of the project meets the requirements of the national industrial policy and planning, and the environmental protection measures adopted are feasible. All pollutants can be discharged to the standard, and the impact on the surrounding environment is small. The construction of the project is feasible from the perspective of environmental protection. of.

View Article →

08/21/2020

Shandong Changtai Industry and Trade Co., Ltd. website will be launched soon, welcome to visit!

Shandong Changtai Industry and Trade Co., Ltd. is located in the shining Yellow River Delta, the first village of China's tires-Xishui Industrial Park, covering an area of 100,000 square meters. Adjacent to Dongqing Expressway, the traffic is developed. The company has advanced equipment and strong technical force. The company has a solid research and development foundation, mature production technology and high-quality products. It is one of the largest tire inner tubes and tire curing bladder manufacturers in the Yellow River Delta. Shandong Changtai Industry and Trade Co., Ltd. is a comprehensive rubber product processing enterprise with the production of butyl inner tubes, water tires, tire curing bladders and radial tire building machines as the leading manufacturer. The annual output of inner tubes is 10 million and the tire curing bladder is 300,000; Registered capital of 48 million; profit and tax of 30 million; total assets of 150 million; sales revenue of 400 million. The company's product specifications are complete, and the sales network covers all parts of the country. The products are well received by users. In the tide of market economy, challenges and opportunities coexist. Shandong Changtai Industry and Trade Co., Ltd. adheres to the business philosophy: "Do every product seriously, and truly serve every customer". And with its unique vitality, this concept is engraved in every link of Shandong Co., Ltd. production, operation and sales. The tenet of "quality as the foundation, science and technology as the guide, market survival, credibility as the guarantee, and user interests first" has been formed. Song Hongchang, chairman and general manager of Shandong Changtai Industry and Trade Co., Ltd., and all my colleagues pay tribute to friends from all walks of life who have cared about and helped the development of the enterprise for many years! Looking forward to sincere cooperation with you, let us work together to create a better future!

View Article →

Shandong Changtai Industry and Trade Co., Ltd. website will be launched soon, welcome to visit!

View Article →

VIEW ALL NEWS

Changtai Industry & Trade

Changtai is a comprehensive rubber product processing enterprise integrating design, manufacture, sales and service. We mainly produce natural rubber inner tube, butyl inner tube, curing bag and tyre curing bladder.

HOME

1

2

10

1000

9800

ISO/TS16949: 2009 automotive supplier quality system certification common sense

Annual production of 300,000 rubber tire vulcanization bladder project

Shandong Changtai Industry and Trade Co., Ltd. website will be launched soon, welcome to visit!